CheckaTy

Environment

Is the water hard or soft at this home?

Water hardness is the amount of dissolved calcium and magnesium in the supply. The report estimates it from the rock type at the nearest Environment Agency groundwater station, giving a band from Soft to Very hard and a rough figure in mg/L.

Enter an address or postcode

What the report shows

  • A band: Soft, Medium, Hard or Very hard
  • An estimated range in mg/L as calcium carbonate
  • The aquifer type and the nearest monitoring station
  • Other monitoring stations within 5 km

About this data

Rain picks up minerals as it passes through rock, so geology sets the band here: chalk and limestone give the top band, and clay and peat the bottom one. Hard water leaves limescale in kettles and appliances.

Source
Environment Agency Hydrology service: monitoring stations and their aquifer types.
Where it covers
England only. Environment Agency stations aren’t used to estimate hardness elsewhere.
What it doesn’t tell you
This is an estimate from geology, not a test of tap water. Supplies can come from far away, and your water company publishes the hardness of your actual supply.

Questions

How do I find out the hardness of my actual water?

Water companies publish it, usually through a postcode search on their websites. Testing strips sold for dishwashers also give a quick reading at the tap.

Does this test drinking water quality?

No. The card’s title mentions water quality, but its figure is hardness only. Water companies publish their own test results.

Which rocks give the hardest water?

Chalk and limestone, estimated at 250–350 mg/L here, then sandstone at 150–250. Clay and peat sit at the soft end, at 20–80.

Related checks